Home » News » Press Releases  » 3D Design Tools Drive Productivity at SUNGDONG

3D Design Tools Drive Productivity at SUNGDONG

October 22, 2015 10:33

Structural design throughput time for whole vessel models reduced by up to four weeks with NAPA Designer and NAPA Steel

BUSAN – OCTOBER 22, 2015 –SUNGDONG Shipbuilding & Marine Engineering, the South Korean shipbuilder, and NAPA, the global leader in maritime software, services and data analysis, today announced that the yard’s structural design throughput time has been reduced by up to four weeks with the introduction of the new CAD-style 3D modelling tool, NAPA Designer. The success of streamlining the shipbuilder’s working process with automatically created classification drawings and global finite element (FE) models from NAPA Steel, including its direct data interfaces with class society software, was also announced.

SUNGDONG entered into a joint development project with major class societies in advance of the enforcement of new International Association of Class Societies (IACS) vessel design standards on 1st July 2015. As part of the project it replaced its traditional structural design and plan approval process with 3D modelling whole vessels in NAPA’s new geometry modelling tool, NAPA Designer.

Under the previous process, which had a throughput time of eight to nine weeks, a 2D design drawing of each individual vessel hold was created and then translated manually into 3D models in the unique software used by the class society it was working with on that project. First trialled in the structural design of a 158,000 dwt Suezmax Tanker, NAPA Designer’s interactive 3D structural modelling interface allowed enhanced productivity through whole-ship modelling rather than designing hold by hold.

NAPA Steel’s direct data interfaces with class society software then enabled cross-section geometry and initial scantlings, as well as compartment information to be exported to the rule check system with up to date FE mesh for global, local and fine mesh analyses. Results that fulfilled the requirements of the rule check were then imported directly back to the 3D product model.

The throughput time for design and class approval of the entire vessel design for this first design, including the time to familiarise with the software, was eight weeks; approximately the same as the throughput time for a single block under the traditional process. A subsequent whole-ship design has taken around five weeks and it is believed the process can be further reduced to two to three weeks, up to a 75% reduction in overall throughput time.

Hyung-Joon Ahn, Vice President, SUNGDONG Shipbuilding & Marine Engineering commented:
"Before the new IACS common structural rules came into force, SUNGDONG wanted to understand the effect of the change, and work to optimise the process as much as possible. Modelling vessel blocks in NAPA Designer did not have a great effect on time, but when whole-ship models were produced we found it took the same time as a block. The second 3D whole-ship design was nearly four weeks faster. We are working to increase productivity and optimize systems; NAPA Designer and NAPA Steel are helping us to achieve that.”

Esa Henttinen, Vice President, NAPA commented:
“At NAPA we are dedicated to meeting customer needs and committed to continuously enhancing the user experience. So we were grateful to SUNGDONG for the opportunity to participate in its joint development project and show how NAPA Designer and NAPA Steel’s powerful design and analytics tools can reduce man-hours. We have put in extensive, systematic research, and engaged over 200 NAPA customers, all with the aim of making NAPA Designer intuitive and to aid yard productivity. The benefits achieved by SUNGDONG demonstrate that our work has been well worthwhile. NAPA Designer will be a free update to our existing customers and we look forward to helping each of them to achieve similar success.”


About NAPA
In its 25 years of operation, NAPA has become a global leader in maritime software, services and data analysis for the maritime industry; providing best in class data-led solutions for safety, efficiency and productivity in both ship design and operations.

NAPA operates globally, with ten offices across Asia, Europe and the Americas supported by its Helsinki headquarters. To date, NAPA has nearly 400 user organisations for its design solutions and 2,000 installations onboard vessels. For more information, visit www.napa.fi


Media Enquiries:

Kate Astley
BLUE Communications
T: +44 1865 514 214
E: kate [ at ] blue-comms.com

Back »

Success Stories

NAPA's 3D Design Tools Drive Productivity at SUNGDONG

Structural design throughput time for whole vessel models reduced by up to four weeks with NAPA D... Read more »

Japanese Kyokuyo Shipyard to improve its structural design process with NAPA Steel

NAPA’s customer base has grown steadily for NAPA Steel. We are honoured to announce the newest NA... Read more »

NAPA Data Analysis leads to €3 million investment and first commercial order for Norsepower

NAPA analysis verifies that twice the rotor sails delivers double fuel savings; 6.1% reduction in... Read more »

ClassNK-NAPA GREEN - a Comprehensive Eco-Efficiency Solution for Ship Owners and Operators

ClassNK-NAPA GREEN offers ship owners and operators a comprehensive solution to reduce fuel costs... Read more »

Bore - NAPA collaboration demonstrates environmental and financial value of operational efficiency software

1,000 tonnes of CO2 saved plus 5.8% reduction in fuel consumption, equivalent to $210,000 Read more »


3D Design Tools Drive Productivity at SUNGDONG+